Brand: Shaw® Barrels

↓ READ THIS! ↓

This barrel is Made-To-Order.
Typically ships in 10-12 weeks.
^{*Any Configuration*}

↑ READ THIS! ↑

^{Supported Calibers: .172 - .358 (Standard Magnum)
Lengths: 16.5" Min. - 24" Max.
Weight: 3lbs., 2oz. (Based on .308 caliber at Max. Length.)}

YOU ARE ORDERING A BARREL ONLY HERE!
If you wish to have us install this barrel on your receiver, please click this link:
> FIT THIS BARREL TO MY RECEIVER <

• ---

  Finish
  "In The White" for 4140 = no finish.
• Barrel Length
  This is the finished length of the barrel.
• Caliber/Cartridge
  If ordering as a blank, select one of the
  ".___ Caliber Blank No Chamber" options and select "No Chamber" under Chambering.
• Twist Rate
  Twist rate must correspond to the Caliber/Cartridge chosen.
• Chambering
  *Short Chamber - ^{Requires a Finish Reamer to cut the chamber to final dimensions and set headspace.  Chamber will be short by ≈.050"}
  *Deep Chamber - ^{Chamber is fully cut, but ≈.025"-.050" deep.  A lathe is required to set back the shoulder and hub to set headspace.  Select this option if you lack the appropriate Finish Reamer.}
  *See Safety Warning below.
  **Finished Chamber - ^{Available ONLY for Ruger American rifles using the barrel nut, just like it says.  If you choose this option and the Receiver Thread is NOT Ruger American using barrel nut, Chambering will be Deep Chamber.}
  >If you select "No Chamber" for this option, regardless of your selection in 'Caliber/Cartridge', then the barrel will not be chambered! 
• Muzzle Treatment
  11 Degree Target Crown is the default crown for all barrels with muzzle threading.
  9/16-24 Muzzle Thread pattern only available at 20" and shorter!
  Muzzle Brake thread pattern dependent upon caliber and barrel length.
  Muzzle Brake adds 2" to finished length when installed.