Supported Calibers: .172 - .458 | Lengths: 16.5" Min. - 26" Max. Weight: 4lbs., 8oz. (Based on .308 caliber at Max. Length.)
YOU ARE ORDERING A BARREL ONLY HERE! If you wish to have us install this barrel on your receiver, please click this link: > FIT THIS BARREL TO MY RECEIVER <
Finish "In The White" for 4140 = no finish.
Barrel Length This is the finished length of the barrel.
Caliber/Cartridge If ordering as a blank, select one of the ".___ Caliber Blank No Chamber" options and select "No Chamber" under Chambering.
Twist Rate Twist rate must correspond to the Caliber/Cartridge chosen.
Chambering *Short Chamber - Requires a Finish Reamer to cut the chamber to final dimensions and set headspace. Chamber will be short by ≈.050" *Deep Chamber - Chamber is fully cut, but ≈.025"-.050" deep. A lathe is required to set back the shoulder and hub to set headspace. Select this option if you lack the appropriate Finish Reamer. *See Safety Warning below. >If you select "No Chamber" for this option, regardless of your selection in 'Caliber/Cartridge', then the barrel will not be chambered!
Muzzle Treatment 11 Degree Target Crown is the default crown for all barrels with muzzle threading. Muzzle Brake thread pattern for this barrel will be 5/8-24 for all calibers. Muzzle Brake adds 2" to finished length when installed.
SAFETY WARNING
This barrel must be fit to your receiver and finished to the proper headspace by a qualified gunsmith using the proper tools and measuring equipment. The finished barreled action must be test fired with factory ammunition. Failure to follow these warnings may result in injury or death.
CALIFORNIA PROP 65
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
